A new DEWALT DW9057 Power Tool Battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder DEWALT DW9057 may require three to four charge/discharge cycles before achieving maximum capacity. New DEWALT DW9057 needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Power Tool Battery pack in a fully charged staged for storage.When charging the DEWALT DW9057 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure
It is important to condition (fully discharge and then fully charge) the DEWALT DW9057 every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that DEWALT DW9057 be removed from the device and stored in a cool, dry, clean place.
Power Tool Battery Charger
Invest in a good charger for your power tools. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your power tools.
Be sure to store your Power Tool Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your DEWALT DW9057 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.
Special Price!!! Milwaukee 48-11-2401 12-Volt Lithium-ion Cordless Tool Battery
Click for larger image and other views
Milwaukee 48-11-2401 12-Volt Lithium-ion Cordless Tool Battery Feature
- 1.4-amp hour battery
- Lightweight- over 65-Percent lighter vs. "compact" NiCd batteries
- Compact- over 50-Percent smaller vs. "compact" NiCd batteries
- Ergonomic- compact and lightweight design for operator comfort
- Lithium-ion battery delivers longer life and run-time with fade-free power
Milwaukee 48-11-2401 12-Volt Lithium-ion Cordless Tool Battery Overview
Milwaukee M12 Lithium-Ion cordless tool battery. Li-Ion batteries deliver longer life and run-time with fade-free power. Ergonomic, compact, and lightweight design for operator comfort. Compatible With: All Milwaukee M Series cordless tools, Battery Amp/Hour: 1.4, Battery Type: M12 LI-Ion, Items Included: 1 BatterySAVE NOW on the special offers below!
Available In Stock. |
| This Milwaukee 48-11-2401 12-Volt Lithium-ion Cordless Tool Battery ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
